While we've lost count of the classic bikes we've repaired and restored here at the shop, our sense of wonder at the unusual and beautiful products of the last century is far from dead. When this 1959 Apollo rolled through the door, we realized early on that under all the surface corrosion and cracking rubber we'd find a gem. Some might call it an antique, but this classy old roadster has a new lease on life and a new chance to get out there onto the pavement. We had a great time working on it, and thought we'd share a little!

A shot of the bike before any work was done.

Steel wool, if you didn't know, is excellent at removing corrosion from chrome.

Left = pre-polishing, right = post-polishing.  So shiny!

The finished product.

Check out those sweet rod-actuated stirrup brakes.

They really don't make them like they used to.

Time and leather treatment and more time.

Shiny means smooth braking.

So clean you can see me in it!

SNOWPOCALYPSE!

No matter how much we swear we've learned our lessons, Seattle always seems to get caught by surprise by the snow. There we were, minding our own business with our feet all toasty in our sandals and socks, when the temperature plummeted and it turned into Juneau in January. While this year the City did a much better job than last year at preventing widespread carnage and destruction, we at Dutch Bike Seattle still didn't bring in studded tires because it never snows in Seattle. Even if we had stocked them, I'm not sure they'd sell because it never snows in Seattle, right?

We found something else, though. Something else entirely.

You're not going to believe it at first.

It's quick, it's cheap, and yes, it looks completely ludicrous.

BUT. It works. It works beautifully.

I can accelerate, brake, and corner with aplomb, even on the vile snowpack/sheet ice mix the plows leave in the bike lanes. The zip ties dig nicely into the hardest packed surfaces, but they're thin enough not to bounce the bike around at low speed or on short pavement sections.

I've cunningly positioned the tie heads to dig in as soon as the bike goes into a corner while staying up and off the ground in a straight line. This is the place that the ties are most likely to interfere with the fenders, so if you're installing these yourself be careful to make sure you have or can create the clearance.

It is at this point that I must admit that I didn't dream up this amazing technique. It pains me to admit this not because my ego suffers, but because the zip-tie-DIY-bicycle-snow-chains idea appears to have originated with my favorite bicycle industry whipping boy: fixed gear hipster culture. Several years ago, I'm sure, some bright child with extremely tight pants and an asymmetrical haircut had a genius-caliber idea, and I hate that it wasn't me. So here it is: Fixed gear street bike hipster guys, I'm sorry for the things I've said over the years. It's not true that the only drink you like is 4Loko. It's also not true that you're not allowed to wear shoes that don't match your bikes. You can wear whatever you want. And finally, you have come up with a good idea besides brightly colored deep-section rims.

Fall is here!  Which means, for those of us living here in Seattle, rain.  A lot of rain.  Driving rain.  Endless driving rain.  I’m pretty sure that last November it actually rained every day.  However, any experienced Northwestern cyclist can tell you that the best way to combat the crushing depression of the winter months (other than maybe buying a SAD lamp) is to keep riding your bike!  And what this means, is fenders. 

There are many different types of fenders.  Because I insist on riding completely impractical bikes, my only option are the clip on, or “fairly ineffective,” type of fenders.

These fenders are convenient because they simply clip on to the seat stays and fork blades of the bike, and don't need any eyelets or mounting hardware.  They’re inconvenient because they don’t really work very well, and as a result my bike is always dirty

and my feet are always wet and sad.

So, despite the more involved mounting process, full fenders are a better option.  They provide much greater coverage, which is great for your bike because it keeps it clean, prolonging the life of your components, and great for you because it keeps you more dry, prolonging the life of your ride.  A great example of full fenders are the ones that Fritz has on his bike.  Look at that clean bike!

And look at those happy feet!

“But wait!” you might say.  “I ride a racy road bike! I don’t have room for fenders! Or eyelets!”  Not to worry!  Both Fritz and myself have extensive experience putting together custom fenders to fit on even the most race-oriented carbon fiber speed machine.  There are several ways we can do this, but our most common method is to actually fabricate some mounts out of rack struts (thin, rectangular pieces of steel) and use these to clear the tight spaces in between the tires and brake calipers.  In the case of bikes without eyelets, we can use different types of clamps to keep the fender stays attached to the frame.

So why wait! Get some fenders! Keep your feet dry!

We've carried bikes from Linus for more than six months now, and in that time we've sent a surprising number of the little guys and gals out into the world in both Chicago and Seattle. It's been a pleasure to see them locked to bike racks downtown in the Loop , rolling down the Burke Gilman, and hanging from the chain link outside bars on Capitol Hill in Seattle. I've seen them used for commuters, bar bikes, kid haulers, and “couples' cycling incentives.” Just as Linus riders seem to have discovered the versatility of the design, we've had a great time expanding the capabilities of the bikes themselves. Here are a pair of the projects Alex and I have set up with some of the bikes. We've had a huge amount of fun thinking up ways to keep the Linus style undiluted while adding function and some new ways to ride!  If you cold winter riders are  looking to set up your Linus, Chicago Schwinn or  Raleigh with a similar light set-up ask us about the Schwalbe studded tires for winter riding.  

Classic headlight, classic tire generator, classic Roadster 3, and a nice warm yellow halogen beam.

Live on the top of a monster hill? The SRAM i-Motion 9 hub nearly triples the gear range of this Dutchi.

Dream it up and your Linus can probably do it.

We've been repairing, maintaining, and upgrading all types of bikes here at Dutch Bike since day one, because while we love the somewhat exotic (here in the US, at least) mechanical aspects of the bikes we import, one of our core beliefs is that the best bike is the bike that you ride, whatever it is. Whether we're installing custom fenders on your 90's Bianchi racer or overhauling your 1976 Schwinn cruiser, we love keeping bikes on the road.

Particularly in the past two or three years, I've seen a massive upswing in the numbers of bikes being brought out of storage, bought used, or restored for everyday use. All types of reasons – economic, practical, or ethical – bring these faithful steeds back into harness, but my favorite of all is that it just seems to have become cool. With increasing numbers of bicycles on the road – many of them seeing their second tour of duty – every shop is seeing an increase in repair traffic and, more relevantly, more people are becoming acquainted with the world of bike repair.

For many, getting a bike repaired can be even more intimidating than “taking the car in.” I will be the first to admit that bicycle service shops do not have a stellar reputation for friendliness or customer service, and even though a bike is less complex than a car it can still be an opaque and mysterious opponent when it's not working properly. For these very good reasons, a large number of my service customers don't come to the shop for anything as specific as wheel truing or derailleur hanger alignment, but rather for a general tune-up. It might be every few hundred miles or every few years, depending on where and how you ride, how your bike is designed, and how it's stored and cared for. Whether your mechanic calls it a “tune-up” or a “general service” or a “maintenance package,” the basic idea is the same: make my bike work so I can keep riding it. You drop your tired, creaky steed at the shop, and a day or two later you pick it up shiny and ready for another ride. What actually happens to the bike, though?

As you've seen in previous posts, I enjoy few things more than deflating the fear and mystery around the technical side of bicycles, and so today we'll walk through exactly what goes on during a tune-up. Different tune-ups will include a variety of different operations (wheel truing, adjustment, part replacement, etc.), and different shops will provide a sometimes bewildering variety of options and levels of detail. The tune-up you'll see here is our “Comprehensive,” usually best for older bikes or commuters with medium to high mileage. If the bike requires less I'll suggest a less in-depth “Standard” or “Basic,” or simply perform a few adjustments a la carte.

First, I'll remove the wheels to make cleaning the bike easier and because I'll be working on them individually later. I'll spray and wipe down the frame and components with a weak cleaning solution (I like Simple Green), because it's much more pleasant to work on a clean bike.

Now for the wheels: cleaning first, then truing and balancing spoke tension.

Next I'll open the hubs to check the bearings and inject fresh grease. When I put them back together, I'll be sure to adjust them so that they'll spin smoothly when they're installed.

Back on the bike, I'll do the same to the headset and bottom bracket bearings if they can be serviced. Before I reinstall the wheels, I'll sand and pick debris out of the brake pads for stronger and quieter braking.

Now that the pads are clean and grippy, I'll adjust the pad position and spring tension of the brakes so they'll work powerfully, quietly, and drag-free.

With the brakes “dialed,” I'll move on to the derailleurs; adjusting the cable tension and limit screws, and the position of the derailleurs themselves to optimize the speed, smoothness, and above all the accuracy of each gear change.

Finally, I'll check the tire inflation and take the bike for a test ride to make sure everything is working perfectly!

As you can see, there's no mystery and no magic here, but the proper tune-up should have your bike riding like new – or at least close to it – and keep you going for plenty of rides. Having your bike tuned may not be the most glamorous, but the cumulative positive effects of a smoothly functioning bike can be far-reaching!

Welcome to the Dutch Bike Café!

This is Brian, the lead Barista at the new Dutch Bike Café that is located right in the heart of old Ballard in the Dutch Bike Co. Take a break from shopping for your Workcycle or a Bakfiets and check out our new coffee locale! I’m excited to let you know about the refined focus on coffee and espresso in our warm and inviting new café.  

We are using locally roasted Lighthouse Coffee, and getting compliments and winning loyal regulars right from the start. The espresso profile is rich and warm with lingering notes of cocoa and a dry finish, much like a good red wine. To showcase the fresh roasted beans we are offering great drinks like the macchiato: which is espresso with a touch of steamed milk. We call it “the world’s tiniest latte." The doppio -- simply a double shot of espresso in a cute little cup & saucer -- is another great way to savor the flavor of the espresso. If you’re a traditionalist we have piping hot French press coffee all-day for your “drip coffee” experience.

Pair any of our great espresso drinks -- like the cinnamon and vanilla infused cappuccino -- with a lunch sandwich hot from the grill or one of Julie’s famous Salted Chocolate Chip Cookies and you are in for a tasty and enjoyable treat!

Plenty of folks are stopping in for a cup of morning joe and a breakfast sandwich. We also see a lot of you swinging in with your bikes for a tune-up and to test ride the great selection of bikes at the shop and to have a latte with friends.

Stay tuned for more updates on our fabulous baked goods, ice cream sandwiches, and espresso delights!

Good grief, we're so close to opening customers are already trying to get around the construction fence out front! I'd like to thank all of our wonderful Seattle customers for waiting so patiently while we've been putting this beautiful new space together. While you might miss the “underground” ambiance of the old warehouse space, or the hilarious – if sometimes disturbing – antics of the regulars down at the boat launch, you'll have a wonderful time in the new shop. With a near-perfect double short americano in hand, I've already had some wonderfully relaxing mornings watching the increasingly large volume of bicycle traffic up and down Ballard Avenue in front of our gigantic glass front. In a few days, you'll be able to check out the new models from Linus or Civia – and of course Workcycles – out front, or take your coffee and wander towards the other end of the shop to take a look at some of the cool new parts and accessories populating all this new wall space.

So thanks again for waiting for us, Seattle, and in just a few days we'll be back in action; ready to tune your bikes, satisfy your practical bike cravings, and get you all wired on some great coffee.

If you've talked with any of us here at Dutch Bike in the past year, you've probably heard us talk about “the move.” While we're staying in the same area, we're moving the Seattle shop onto historic Ballard Avenue: the main street of one of Seattle's most interesting and vibrant neighborhoods. Ballard Ave perfectly balances the nightlife, boutiques, and restaurants we enjoy with the hardware, sheet metal, machining, and other light industrial businesses that keeps the neighborhood lively and living. Of course, because we could never forget our roots down by the boat launch in “scenic industrial Ballard,” we feel right at home in a building between a machine shop and 58 year old Ballard Hardware and Supply.

The building into which we're moving was for the first part of the century home to Kolstrand Manufacturing Co., a famous name in the Northwest marine industry. The Graham-Baba designed rebuild has maintained the old brick shell with even the remnants of the original “Kolstrand Mfg. Co.” paint intact while creating a polished and eminently usable retail and restaurant space inside.

Our designer and builder – David Lipe of 16D – has similarly reused much of the original wood and materials in the interior construction, including some beautiful and humorous touches that you'll just have to drop by to experience. Inside the shop we've also commissioned a mural by Ed Fotheringham, our friend responsible for our “flower girl” and “keg mover” posters.

In addition to Alex – the newest addition to the bike shop – we've got several great baristas (baristi for the language purists) warming up for the cafe component of the new shop. Your eyes do not deceive: the new Dutch Bike Seattle shop will be Seattle's first fully implemented bicycle cafe! We'll be brewing excellent and powerful coffee from local roaster Lighthouse, starting at six AM so you can start even your earliest morning rides with a bang. David has been updating the Flickr stream with the array of delicious snacks Julie has been designing for the shop, and the pictures will make you hungrier than anything I could write here. You'll also find made-to-order sandwiches, pastries from lauded local bakery Macrina, and some tasty – and surprisingly filling – cookies.

The finishing touches are going on the construction as I write this, and our grand opening is still on schedule for July 24^th. We'll be fully operational- tuning, repairing, upgrading, renting, and of course selling bicycles, and rolling out an expanded array of interesting accessories. With two expert mechanics our turnaround time for tune-ups and other in-depth maintenance will be close to the same you'd expect from your coffee orders. In fact, if you're ordering anything more complicated than an americano while you get your flat fixed, maybe we'll race you!